化学浸提-电感耦合等离子体发射光谱法测定粉条中活性铝的化学形态

采用化学浸提-电感耦合等离子体发射光谱法(ICP-OES)测定粉条中溶出铝的化学形态及其含量.实验结果显示,粉条溶出铝中,Al3+为135 μg/g,Al(OH)2+和Al(OH)2-未检出,胶态Al(OH)3o为143 μg/g,有机铝为460 μg/g.各化学形态铝含量的回收率在88.3％～105％范围,精密度(RSD)为1.14％,方法检出限为0.74 mg/kg.该方法准确度高,精密度好,检出限低,线性关系好,是一种简便实用的食品、药物中活性铝化学形态的检测方法.     

Combining Charge‐Transfer Pathways to Achieve Unique Thermally Activated Delayed Fluorescence Emitters for High‐Performance Solution‐Processed,Non‐doped Blue OLEDs

Two efficient blue thermally activated delayed fluorescence compounds, B‐oCz and B‐oTC , composed of ortho‐donor (D)–acceptor (A) arrangement were designed and synthesized. The significant intramolecular D–A interactions induce a combined charge transfer pathway and thus achieve small ΔE _ST and high efficiencies. The concentration quenching can be effectively inhibited in films of these compounds. The blue non‐doped organic light emitting diodes (OLEDs) based on B‐oTC prepared from solution processes shows record‐high external quantum efficiency (EQE) of 19.1 %.     

300 MW等级燃煤机组煤粉炉与循环流化床锅炉汞排放特性比较

选取某地330 MW煤粉炉(PC炉)和350 MW循环流化床锅炉(CFB)的燃煤电厂进行汞排放特性的研究。采用30B法和安大略法对两个燃煤电厂的除尘器入口、除尘器出口、脱硫塔出口和湿式电除尘器出口的烟气进行了取样和汞浓度分析,采集了入炉煤和副产物底渣、飞灰及脱硫石膏样品。通过样品中汞含量的分布,探讨了PC炉与CFB锅炉机组现有污染物控制设备对汞的协同脱除作用。结果表明,350 MW CFB电厂除尘器出口烟气平均汞浓度降低至0.43μg/m~3,布袋除尘器对汞的捕获效率达到98.9%,相应的燃烧副产物中飞灰是汞的主要富集对象。对于330 MW PC炉电厂,除尘器入口和除尘器出口烟气汞浓度均高于350 MW CFB电厂,烟气汞浓度从除尘器入口、除尘器出口到脱硫塔出口依次降低,在脱硫塔出口烟气汞浓度降低至0.42μg/m~3,静电除尘器和湿式脱硫塔对烟气汞的捕获效率分别为75.0%和22.4%,相应的产物中飞灰和脱硫石膏中汞都有一定程度的富集。     

基于铜纳米簇的聚集诱导发光检测铅离子

基于谷胱甘肽保护的非贵金属铜纳米簇(Cu NCs@GSH)的聚集诱导发光现象,建立了快速检测铅离子(Pb2+)的“Turn on”型荧光分析方法.Cu NCs@GSH溶液荧光强度很弱,当存在pb2+时,荧光强度可显著增强,溶液显示明亮的橙黄色.基于此原理建立了检测pb2+的荧光方法,线性范围为200～700 μmol/L,检出限为106 μmol/L,常见金属离子不干扰pb2+的测定.本方法简单快速、选择性高,可实现对pb2+的可视化定性检测.     

Fluorescent Detection of Cu(Ⅱ) by Chitosan-based AIE Bioconjugate

Detection of Cu(Ⅱ) is very important in disease diagnose, biological system detection and environmental monitoring. Previously, we found that the product TPE-CS prepared by attaching the chromophores of tetraphenylethylene(TPE) to the chitosan(CS) chains showed excellent fluorescent properties. In this study, we tried to use TPE-CS for detecting Cu(Ⅱ) because of the stable complexation of CS with heavy metals and the luminosity mechanism of the Restriction of Intramolecular Rotations(RIR) for aggregation-induced emission(AIE)-active materials. The fluorescence intensity changed when TPE-CS was contacted with different metal ions, to be specific, no change for Na~+, slightly increase for Hg~(2+), Pb~(2+), Zn~(2+), Cd~(2+), Fe~(2+), Fe~(3+) due to the RIR caused by the complexation between CS and metal ions. However, for Cu~(2+), an obvious fluorescence decrease was observed because of the Photoinduced-Electron-Transfer(PET). Moreover, we found that the quenched FL intensity of TPE-CS was proportional to the concentration of Cu(Ⅱ) in the range of 5 μmol/L to 100 μmol/L, which provided a new way to quantitatively detect Cu(Ⅱ) . Besides, TPE-CS has excellent water-solubility as well as absorbability(the percentage of removal, R = 84%), which is an excellent detection probe and remover for Cu(Ⅱ) .     

废水生物脱氮工艺中N2O排放数学模型研究进展

N_2O是一种重要的温室气体,而污水生物脱氮处理过程是N_2O的潜在产生源之一。随着污水处理量和处理程度的不断提高,N_2O的排放量也将不断增大。建立N_2O排放数学模型对污水生物脱氮系统中N_2O生成机制的深入研究和污水处理行业N_2O削减工艺技术的开发具有重大的理论及实践意义。本文归纳了生物脱氮工艺的原理,系统阐述了生物脱氮工艺中N_2O的生成机理和排放数学模型的类型、建立方法及应用情况。在此基础上,对生物脱氮工艺中N_2O排放数学模型的研究现状和研究方向进行了总结和展望,以期为N_2O排放数学模型的完善、N_2O排放量的削减、污水生物脱氮工艺的优化及污水处理行业的可持续发展提供理论基础和科学依据。     

Fluorene-containing tetraphenylethylene molecules as lasing materials

A series of star-shaped oligofluorene molecules, each containing a TPE core, have been specifically designed and produced to show effective aggregation-induced emission (AIE). Each molecule differs either in the number of fluorene units within the arms (e.g., 1 or 4, compounds 4 and 5 ), or the terminal group positioned at the end of each arm (e.g., H, TMS, or TPA, compounds 4 , 6 , and 7 ). Although they are all poor emitters in solution phase they become efficient yellow-green luminogens in the condensed state. Their AIE properties were investigated in THF/H₂O mixtures, with each molecule exhibiting a clear emission enhancement at specific water contents. An all-organic distributed feedback (DFB) laser was fabricated using compound 4 as the gain material and exhibited an average threshold energy fluence of 60 ± 6 μJ/cm² and emission in the green region. Furthermore, piezofluorochromism studies on a thin film of this material displayed a linear dependence of the amplified spontaneous emission (ASE) peak position on applied pressure, indicating potential applications as lasing-based pressure sensors. © 2016 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 734–746     

悬浮液直接进样ICP–OES法测定高纯氧化铝中的铁、钛、硅、铬

采用悬浮液直接进样电感耦合等离子体发射光谱法(ICP–OES)测定高纯氢氧化铝中铁、钛、硅、铬的含量。悬浮液用电磁搅拌器搅拌,均匀地分散在溶液中,通过仪器蠕动泵进入雾化室,均匀无阻地导入ICP光源。Fe,Ti,Si,Cr的分析谱线分别为259.940,336.112,251.611,205.552 nm;RF功率为1 300W,等离子体气流量为13.0 L/min,雾化器气体流量为0.60 L/min,辅助气流量为1.00 L/min。Fe,Ti,Si,Cr的质量浓度分别在0.0~30.0,0.0~15.0,0.0~90.0,0.0~15.0μg/m L范围内与信号强度呈良好的线性,线性相关系数均大于0.999,方法的检出限为0.027 6~0.993 9μg/m L,测量结果的相对标准偏差为0.65%~6.84%(n=11),回收率为95.0%~104.8%。该法抗干扰能力强、线性范围宽,适用于高纯氢氧化铝中铁、钛、硅、铬含量的分析。     

一维六方准晶压电材料中幂函数型曲线裂纹的反平面问题

依据一维六方准晶压电材料反平面问题的基本方程,利用复变函数方法,通过引入适当的保角映射,研究了一维六方准晶压电材料中幂函数型曲线裂纹的反平面问题,并利用Cauchy积分理论,得到电不可通和电可通边界条件下的应力场和位移场的复表示以及裂纹尖端场强度因子的解析表达式.